Product added to your wishlist! View wishlist
Sign in to see your saved products on any device
Product removed from your wishlist! View wishlist
Sign in to see your saved products on any device
Something went wrong. Please try again later.
Product is added to compare already. Please refresh the page.
Product is not found in compare. Please refresh the page.
5 Products already added. Please delete existing selection to add this.
Share this product
Drolet DB03182 Escape 1200 18 1/2 Inch Free Standing Wood Stove at KBA Home Studio
This product ad may change over time
ShareDrolet DB03182 Escape 1200 18 1/2 Inch Free Standing Wood Stove at KBA Home Studio
Drolet DB03182 Escape 1200 18 1/2 Inch Free Standing Wood Stove Our most compact unit in the series, the Escape 1200 is the perfect choice for heating homes up to 1,200 ft². With only 1.8 g/h of particulate emissions, this EPA certified wood stove puts out an impressive 45,000 BTU/h. The bottom of its combustion chamber is deeper than other …
Drolet DB03182 Escape 1200 18 1/2 Inch Free Standing Wood Stove Our most compact unit in the series, the Escape 1200 is the perfect choice for heating homes up to 1,200 ft². With only 1.8 g/h of particulate emissions, this EPA certified wood stove puts out an impressive 45,000 BTU/h. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus to be able to empty them much less frequently. A simple model; reliable and robust. Features: Up to 5 hours burn time Up to 17 Inch logs 1.55 ft³ firebox Proudly made in Canada Certified for Mobile Home and alcove installation Average Particulate Emissions Rate: This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the Recommended Heating Area, firebox volume, Maximum Burn Time and maximum heat output As measured per CSA B415.1-10 stack loss method Higher Heating Value of the fuel Lower Heating Value of the fuel Performances based on a fuel load prescribed by the standard at 7 lbs/ft³ and with a moisture content between 19% and 25% Optimum Overall Efficiency at a specific burn rate (LHV) Carbon monoxide Recommended Heating Area: Recommended Heating Area and Maximum Burn Time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel Type and other variables. The Recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure Maximum heat output-Dry Cordwood: The maximum heat output (Dry Cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lbs/ft³ and 12 lb/ft³. The moisture content is between 19% and 25% Optimum Heat Transfer Efficiency: The Optimum Heat Transfer Efficiency is for the low burn rate (using HHV) and represents the appliances ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion Included - Pedestal, air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper Limited lifetime warranty Specifications: Fuel Type: Dry Cordwood (16 Inch Recommended) Recommended Heating Area: 250 ft² - 1,200 ft² Overall Firebox Volume: 1.7 ft³ EPA Loading Volume: 1.55 ft³ Maximum Burn Time: 5 Hours Maximum Heat Output-Dry Cordwood: 45,000 BTU/h (13.19 kW) Overall Heat Output Rate: 12,124 BTU/h (3.55 kW) - 26,700 BTU/h (7.83 kW) Average Overall Efficiency (Dry Cordwood): 74% (HHV) Average Overall Efficiency (Dry Cordwood): 79% (LHV) Optimum Overall Efficiency: 80% Optimum Heat Transfer Efficiency: 79% Average Particulate Emissions Rate: 1.8 g/h Average CO: 74 g/h Combustion Technology: Non-Catalytic High-Efficiency Certified Appliance: Yes, EPA 2020 Approved Log Positioning: Loading Over Width and Over Depth Type of Chimney: CAN/ULC S629, UL 103 HT (2100 °F) Baffle Type: High Quality Vermiculite Approved for an Alcove Installation: Yes Approved for a Mobile Home Installation: Yes, with Fresh Air Intake Door Type: Single, Glass with Cast Iron Frame Glass Type: Ceramic Glass Air-Wash System: Yes Firebox lined with Refractory Bricks for better Heat Distribution: Yes Stainless-Steel Secondary-Air System Improving Gas Combustion: Yes Dimensions: Overall Width: 18 1/2 Inch Overall Depth: 28 7/8 Inch Overall Height: 30 1/8 Inch Door Opening Height: 7 5/8 Inch Door Opening Width: 12 Inch Firebox Height: 11 3/4 Inch Firebox Width: 14 1/4 Inch Firebox Depth: 19 1/8 Inch Chimney Diameter: 6 Inch Flue Outlet Diameter: 6 Inch Maximum Log Length: 17 Inch Minimum Chimney Height: 12 Feet Body Steel Thickness: 1/4 Inch Top Steel Thickness: 3/8 Inch Glass Surface Width: 10 1/4 Inch Glass Surface Height: 8 1/2 Inch Codes and Standards: USA standard (Emissions): EPA Canadian Standard (Emissions): CSA B415.1-10 USA Standard (safety): UL 1482, UL 737 Canadian Standard (safety): ULC S627 Tested and Listed as Per Applicable Standards: By an Accredited Laboratory (CAN/USA)
Description
Drolet DB03182 Escape 1200 18 1/2 Inch Free Standing Wood Stove Our most compact unit in the series, the Escape 1200 is the perfect choice for heating homes up to 1,200 ft². With only 1.8 g/h of particulate emissions, this EPA certified wood stove puts out an impressive 45,000 BTU/h. The bottom of its combustion chamber is deeper than other models in its category and allows a greater accumulation of ashes, and thus to be able to empty them much less frequently. A simple model; reliable and robust. Features: Up to 5 hours burn time Up to 17 Inch logs 1.55 ft³ firebox Proudly made in Canada Certified for Mobile Home and alcove installation Average Particulate Emissions Rate: This appliance is officially tested and certified by an independent agency Values are as measured per test method, except for the Recommended Heating Area, firebox volume, Maximum Burn Time and maximum heat output As measured per CSA B415.1-10 stack loss method Higher Heating Value of the fuel Lower Heating Value of the fuel Performances based on a fuel load prescribed by the standard at 7 lbs/ft³ and with a moisture content between 19% and 25% Optimum Overall Efficiency at a specific burn rate (LHV) Carbon monoxide Recommended Heating Area: Recommended Heating Area and Maximum Burn Time may vary subject to location in home, chimney draft, heat loss factors, climate, fuel Type and other variables. The Recommended heated area for a given appliance is defined by the manufacturer as its capacity to maintain a minimum acceptable temperature in the designated area in case of a power failure Maximum heat output-Dry Cordwood: The maximum heat output (Dry Cordwood) is based on a loading density varying between 15 lb/ft³ and 20 lb/ft³ and reloading intervals ranging from 60 to 120 minutes. Other performances are based on a fuel load prescribed by the standard without any reloading between start and finish. The specified loading density varies between 7 lbs/ft³ and 12 lb/ft³. The moisture content is between 19% and 25% Optimum Heat Transfer Efficiency: The Optimum Heat Transfer Efficiency is for the low burn rate (using HHV) and represents the appliances ability to convert the energy contained in the wood logs into energy transferred to the room in the form of heat and does not take into account the chemical losses during combustion Included - Pedestal, air deflector, ceramic glass, cast iron door with adjustable hinges, ash lip, air damper Limited lifetime warranty Specifications: Fuel Type: Dry Cordwood (16 Inch Recommended) Recommended Heating Area: 250 ft² - 1,200 ft² Overall Firebox Volume: 1.7 ft³ EPA Loading Volume: 1.55 ft³ Maximum Burn Time: 5 Hours Maximum Heat Output-Dry Cordwood: 45,000 BTU/h (13.19 kW) Overall Heat Output Rate: 12,124 BTU/h (3.55 kW) - 26,700 BTU/h (7.83 kW) Average Overall Efficiency (Dry Cordwood): 74% (HHV) Average Overall Efficiency (Dry Cordwood): 79% (LHV) Optimum Overall Efficiency: 80% Optimum Heat Transfer Efficiency: 79% Average Particulate Emissions Rate: 1.8 g/h Average CO: 74 g/h Combustion Technology: Non-Catalytic High-Efficiency Certified Appliance: Yes, EPA 2020 Approved Log Positioning: Loading Over Width and Over Depth Type of Chimney: CAN/ULC S629, UL 103 HT (2100 °F) Baffle Type: High Quality Vermiculite Approved for an Alcove Installation: Yes Approved for a Mobile Home Installation: Yes, with Fresh Air Intake Door Type: Single, Glass with Cast Iron Frame Glass Type: Ceramic Glass Air-Wash System: Yes Firebox lined with Refractory Bricks for better Heat Distribution: Yes Stainless-Steel Secondary-Air System Improving Gas Combustion: Yes Dimensions: Overall Width: 18 1/2 Inch Overall Depth: 28 7/8 Inch Overall Height: 30 1/8 Inch Door Opening Height: 7 5/8 Inch Door Opening Width: 12 Inch Firebox Height: 11 3/4 Inch Firebox Width: 14 1/4 Inch Firebox Depth: 19 1/8 Inch Chimney Diameter: 6 Inch Flue Outlet Diameter: 6 Inch Maximum Log Length: 17 Inch Minimum Chimney Height: 12 Feet Body Steel Thickness: 1/4 Inch Top Steel Thickness: 3/8 Inch Glass Surface Width: 10 1/4 Inch Glass Surface Height: 8 1/2 Inch Codes and Standards: USA standard (Emissions): EPA Canadian Standard (Emissions): CSA B415.1-10 USA Standard (safety): UL 1482, UL 737 Canadian Standard (safety): ULC S627 Tested and Listed as Per Applicable Standards: By an Accredited Laboratory (CAN/USA)